...are quality inspected at 200 to 300 pieces per minute.
A 10 cubic foot overhead hopper meters parts (one size at-a-time)
through a demag coil into a vibratory straight-line drive with interchangable tooling.
It takes only 5 minutes for part changeover.
Tramp material is screened out.
A camera checks for sihloutte compliance and ejects faults.
Finally, washers are sorted for thickness and/or warp between a pair of motor driven gauge wheels.
This model will handle up to a 3-1/4 inch diameter part.
This unit runs 24/7 unattended