...these steel Tubes (18.5mm diameter X 75-140mm long; one length at a time)

are fed to an end cap weld operation.

Parts are manually loaded, end selected into the top of the storage bin.

Shorter than six inch parts are loaded through a side access door.

An adjustable wall in the bin accommodates the range of part lengths.

Storage is 900 pieces for a .05 hour run time.

Gently agitated parts flow from the bin into a single path track to discharge rolling, at 30 pieces per minute.

Efficient, Quiet and Gentle to the pre-machined ends.

GET IN TOUCH

Call us at (734) 522-2160 or   CONTACT US